Relay All Terrain Hub for Electric Skateboards
As low as 4 payments of $5.00 with 
|
|
|
|
|
DESCRIPTION
You’ve got the beast, now make it your own! Pimp your All Terrain setup with our hubs in a colour that reflects you
Manufactured by Evolve, these hubs have been designed for use on our all terrain electric skateboards.
Contents
- 1 x All terrain hub
- Hub nuts
- Hub bolts
- Built-in wheel balance weights
Compatibility
This pattern was released with the GTR1 ad GT series boards
- Please note, that you will need the compatible Relay drive gears for installation
Installation
We recommend you keep your tyre pressure at 40-45psi. If you notice any decrease in your range, be sure your tyres are pumped up!
Yes they look great, installed easily as usual, however the bearing holder is approx 0.3mm larger than the bearing diameter (new Evolve bearing and old original bearings tested). Doesnt sound a lot, but that equates to about 8mm sideways travel at the tread. This was way more than the 3mm gap between the tyre and the belt cover. Current solution is a layer of masking tape around the bearing, slightly overlapped on the inside edge to hold the tape from working out.
New wheels look really good and they were on special so thought why not. However I notice the bearing are not firm in the wheel and the wheel rattles slightly. Original 7 year old wheels were the same so that one reason I bought new ones. I also bought new Speed Balls bearings to fit and they are the ones they are loose. Not a huge issue but throught they would be a tighter fit.
Hey Dave, thanks for the review and feedback!
As we can see you've got a GT board, the loose bearings you mentioned may be due to you needing speedrings to rid the issue.
Please send us an email at support@rideevolve.com.au with your best detailed description of the issue and if possible a video too showing where the bearings are loose and we'll hopefully be able to help you sort this out!
Best regards
Evolve HQ
Lookin so,so good. Loving it.
Cheap and colorful
Obviously these are great hubs…pretty much the industry standard nylon/fiber mix (I assume?). At this price, I got them for the color options.